Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Drying & Thermal Solids Processing

  • Flash Dryer

    July 8, 2008

    The Drymeister Model DMR-1 is available in pilot to large-scale production models with evaporation rates as high as 6000 kg/h. The machine’s design and its high-speed dispersion rotor in combination with a classifying rotor yield high drying efficiency. The dryer can handle materials with a...

    comment
  • Bulkflow Changes Corporate Name to Solex Thermal Science Inc.

    March 31, 2008

    Bulkflow Technologies Inc. has changed its corporate name to Solex Thermal Science Inc. to more accurately reflect its strengths and value to its customers. The name change became effective March 31. Founded in 1999 as Bulkflow Technologies Inc., Solex Thermal Science Inc. remains a privately held...

    comment
  • Powder Filling and Vacuum Drying

    February 5, 2008

    Untitled Document Powder Filling and Vacuum Drying A filling and packaging line is designed for powder filling and vacuum drying. The line consists of Inova components: a VWM 218 washing machine, a SHT 1L sterilizing tunnel with a sterilizable cooling zone, a VFVM 7021 filling and...

    comment
  • Achieving Pharmaceutical Solubility Enhancements Using Spray Drying

    February 1, 2008

    Untitled Document Dilip M. Parikh With the introduction of combinatorial chemistry and high-throughput screening, numerous new potential drug candidates are being investigated for their therapeutic usefulness. However, the...

    comment
  • Two Processing Technologies Combine to Solve a Common Drying Problem

    February 1, 2008

    Untitled Document The Vibroflash fluid-bed dryer Prior to beginning design of a complete dryer system, Carrier Vibrating Equipment Inc. (Louisville, KY) performs confirming drying tests in its Louisville laboratory. The...

    comment
  • Drying & Evaporation Focus - February 08

    February 1, 2008

    Vacuum Dryer This vacuum dryer can dry most solid materials to less than 0.5% moisture. The drying process is based on plow mixing technology, providing a mechanically fluidized bed of material to maximize product contact with the reactor vessel. The dryer can be operated at atmosphere to dry...

    comment
  • Drying & Thermal Solids Processing Spotlight

    October 8, 2007

    Fluid Bed Batch Dryer This circular vibratory fluid-bed processing system dries small batches of bulk solid materials. The self-contained system integrates an 18-in.-diam fluid-bed processor with a heater, a blower, a cyclone separator, and controls, ready for connection to a material inlet/...

    comment

Pages